COLIN'S REVIEW

"Tried and true Bark Collar from Petsafe, Previously PBC102. A good all-round Bark Control collar for easy bark training - I like the beeps as the dog gets corrected, remember 'Pavlov's bell'? You will need to make sure it stays in the right spot but check our guide."

Petsafe Bark Collar PBC19-10765

  • 3 Year Manufacturer's Warranty 
  • Low Training Levels with AudibleTone and 6 Automatic Levels
  • Vibration Activation - Your Dog's Bark Only

RRP AU $119.99 AU $109.99

You Save $10

4 payments of AU $27.50

More Info

Buy now Pay Later

More Info



$109.99 = {$data['pages']->sell_price}}

COLIN'S REVIEW

"Tried and true Bark Collar from Petsafe, Previously PBC102. A good all-round Bark Control collar for easy bark training - I like the beeps as the dog gets corrected, remember 'Pavlov's bell'? You will need to make sure it stays in the right spot but check our guide."

PetSafe Bark Collar - PBC19-10765


 

The PetSafe Bark Control Collar has given us some of the best results of all of our Bark Collars.
Designed to fit small to large dogs, this anti-bark collar is robust, consistent, and is known to be effective in controlling or minimizing your dog’s excessive barking.
You will see instant results when following our training and introduction guide.
nHelp change and retrain your dog's barking habits to a more socially acceptable level of barking.
With 6 automatically increasing levels, starting with a low training level and an Audible tone. This is perfect for a sensitive dog but increases easily to tackle the more determined barking stubborn dogs. Setting it up is as easy, straight out of the box... follow our training guide to get consistent bark training with this Petsafe bark collar for your dog

What’s GREAT about the Petsafe Bark Collar?

KEY FEATURES

  • Compact & Lightweight - For Small to Large Dogs of any personality.
  • Durable & Waterproof / Submersible for longer life
  • Rubber Coating – Minimizes accidental activation.
  • Vibration Activation – Detects the bark of only the dog wearing the collar.
  • No Programming Needed – Fully automatic with self-resetting to the low training/warning level!
  • 6 Automatic Progressive Levels – Automatically increase or decrease depending on the dog’s training needs.
  • Automatic Reset – Goes back to the lowest level after 30 seconds for your dog’s safety.
  • Replaceable Battery – with new Waterproofing built into each module - Petsafe RFA67 Battery - Up to 6 months!

WHAT'S IN THE PETSAFE KIT?

  • PetSafe® Bark Control Collar PBC19-10765 (PBC-102)
  • Adjustable Collar Strap to fit your dog’s neck.
  • 1x PetSafe RFA-67 Battery
  • Contact posts to suit your dog.
  • Owner’s Manual
  • Step by Step Training Guide

Model

PBC19-10765

Correction Modes

Static
Activation Mode Vibration
Correction Levels 6
Waterproof Yes
Dog Size 3.6kg and up
Strap Size 15cm - 71cm
Battery RFA-67
Bark Collar Weight 1.9 oz
Dimensions 2.23" (L) x 2.24" (W) x 1.27" (D)"


6 STIMULATION LEVELS - AUTOMATICALLY INCREASING

The PetSafe PBC-102 Bark Control Collar features 6 total stimulation levels that will automatically increase as your dog barks.
 

AUTOMATIC LEVEL RESET - RESETS BACK TO THE LOWEST LEVEL

To ensure the best results, once your dog stops barking for 30 seconds, the PetSafe Bark Control Collar PBC-102 will automatically reset back to its lowest level.
 

DURABLE AND WATERPROOF DESIGN

Hard knocks and water damage is a thing of the past. The PetSafe Basic Bark Control Collar is completely waterproof to keep your water-loving dog safe.
 

SPECIAL RUBBER COATING TO REDUCE FALSE

A special rubber coating protects the Bark Control Collar from false activation and also helps protect the collar from knocks against other objects.
 

VIBRATION SENSOR - MONITORS YOUR DOG'S VOCAL CORDS

Only your dog’s bark will activate the collar. A vibration sensor monitor’s for vibrations that are produced when your dog barks and delivers stimulation.
 

Compact & Lightweight Bark Collar COMPACT & LIGHTWEIGHT BARK COLLAR

The PetSafe Bark Control Collar PBC-102 is small, compact and lightweight for your dog’s comfort.
 

REPLACEABLE BATTERY - PETSAFE RFA-67 6V LITHIUM BATTERY

This uses the PetSafe RFA-67 6V Lithium Battery. It can last up to 6 months of use under normal conditions and also helps with waterproofing the bark control collar.

PetSafe & Anti Bark Control Collar Manual

 

KEY DEFINITIONS

Contact Points: Delivers the safe Static Correction.
Sensor Probe: Detects the vibrations of your dog’s barking. Note: The Sensor Probe is not adjustable.
Low Battery Indicator: The Indicator light flashes to indicate the battery is low.
 

FIT THE BARK CONTROL COLLAR

Important: The proper fit and placement of your Bark Control Collar are essential for successful training. The Contact Points must always have direct contact with your dog’s skin on the neck.

To assure a proper fit, please follow these steps:
1. Make sure that no battery is installed in the Bark Control Collar. 
2. Let your dog stand comfortably. 
3. Place the Bark Control Collar high on your dog’s neck close to the ears. Center the Contact Points underneath your dog’s neck, making sure it touches the skin.

Note: It may be necessary to trim the hair around the Contact Points to ensure contact.

4. The distance between the Contact Points and your dog’s neck should at least be 1finger. The fit should be snug but not c. 
5. Allow your dog to wear the Bark Control Collar for several minutes and then recheck the fit. Adjust the collar to your dog’s comfortable fit. Again allow the dog to be comfortable and check the fit again. 
6. Trim the collar as follows: 
a. Mark the desired length of the Bark Control Collar with a pen. Give a little allowance especially if your dog is young or if it grows a thick winter coat. 
b. Remove the Bark Control Collar from your dog and cut off the excess strap. 
c. Before putting the Bark Control Collar back onto your dog, seal the frayed edges of the cut collar running it over a candle flame. 

Important: To ensure product comfort, safety, and effectiveness; the following should be observed:

  • Always check the fit by being maintaining the one-finger distance between the Contact Point and your pet’s skin. We do not want it to be too tight or too loose.
  • Your dog’s neck should be checked daily for any sign of a rash or sore. 
  • If a rash or sore is observed, discontinue the use of the Bark Control Collar for a few days. 
  • If the condition does not improve in spite of discontinued use of the collar; or if the condition is still observed and is already beyond 48 hours, see your veterinarian. 
  • Your pet’s neck and the Contact Points must be washed at least once a week with a washcloth and mild hand soap. Make sure to rinse thoroughly after each washing. 

A condition called Pressure Necrosis, which is characterized by a strain or sore caused by compression and prolonged contact may occur if the measures above are not religiously observed.
 

TO INSERT AND REMOVE THE BATTERY

Note: NEVER install the battery while the Bark Control Collar is on your dog.

This Bark Control Collar uses a replaceable PetSafe® battery (RFA-67). This unique battery is designed to make battery replacement easier. It also increases water protection.

To insert the battery, align the symbols on the battery (arrow) and Bark Control Collar (triangle). Use a large coin to turn the battery clockwise until the arrow is aligned with the lock symbol on the housing.

To remove the battery, simply turn the battery counter-clockwise using a large coin. NEVER attempt to cut into or pry open the battery. Be sure to dispose of used batteries properly.
 

BATTERY LIFE

The average battery life is 3 to 6 months. It will depend solely on how often your dog barks. It may be observed that the battery you use during training may run out faster compared to replacement batteries. This is because dogs tend to bark more during the initial stage of training and will normally minimize barking later on.
 

LOW BATTERY INDICATOR

The Low Battery Indicator light will be on to notify you that it is time to change the battery.
 

WHAT TO EXPECT DURING USE OF THE BARK COLLAR

Important: Do not leave your dog alone in the first few days of Training.

Place the Bark Control Collar properly on your dog and stay close by. Most dogs will understand quickly that the Bark Control Collar is doing something to them when they bark; so in response; dogs normally relax and stop barking. And because Static Correction from the Bark Control Collar may be surprising or startling at first, some dogs may bark more at the initial correction. There is always an adjustment stage.

A rare scenario may also occur where a dog may go into a bark-correction-bark-correction cycle especially in the initial phase. If this happens, make sure to help your dog calm down. As your dog relaxes, he will understand that if he becomes quiet, he will not receive Static Corrections. Again; this is very rare.

Usually; a reduction in your dog’s barking is noticed within the first couple of days of use. At this point, it is important to remember the learning process should be complete. Dogs may “test” this new learning experience and will increase their attempts to bark. This usually occurs during the second week. If this does occur, remain consistent and do not discontinue the use of the collar. Your dog must get used to using the collar all the time. Removing the collar every now and then may affect training success.
 

REGULAR MAINTENANCE

• Contact Points tightness should be checked weekly
Note: Do not adjust the factory preset Sensor Probe.

• Clean Contact Points with alcohol weekly
Note: Remove the battery and discharge the Bark Control Collar before touching the Contact Points.

• Check your dog’s neck for irritation and wash the neck weekly.


TESTING THE BARK CONTROL COLLAR

Slide the Sensor Probe across a rough surface that is at least 10 inches. The Bark Control Collar should beep. If your Bark Control Collar doesn’t beep during this test, see “The Bark Control Collar does not beep” in the “Troubleshooting” section, and continue with step 2.
 

ACCESSORIES

Component

Part Number

Battery - two-pack

RFA-67D-11

Replacement Collar

RFA-68

Accessory Pack (Extra Contact Points, washers, and battery)

RFA-118

Bark Control Video - VHS

RFA-149

 

FREQUENTLY ASKED QUESTIONS


Is my dog gonna stop barking completely?
 

• The Bark Control Collar, when worn properly, stops all forms of barking. It should only be worn during periods of unwanted barking; for example at night or during parties.

My dog is sensitive. Can I lower the Static Correction level?

• You can get a resistor to reduce the Static Correction level.

Will other dog’s barking activate the Bark Control Collar?

No.

Is the Bark Control Collar safe for my dog?

 

• Yes. The Bark Control Collar is designed to get your dog’s attention. It is not intended to punish. The initial Static Correction may startle your dog though.

Will the Bark Control Collar be effective for my dog?

• The Bark Control Collar is safe and effective for all breeds and sizes of dogs over 8 pounds.

 


TROUBLESHOOTING





The Bark Control Collar is not beeping.



 

• Test the Bark Control Collar (see “Testing the Bark Control Collar”).
• If your Bark Control Collar still does not beep during this test, do the same test but now on a rougher surface.
• Check to see if the battery is properly installed.
• Replace the battery.
• If the Bark Control Collar is still not beeping, contact Customer Care Center at 1-300-843-364


My Bark Control Collar beeps, but my dog is still barking (dog is not responding to the Static Correction).
 

• Tighten the Bark Control Collar and trim your dog’s hair where the Contact Points touch his neck.
• Replace the battery.
• If your dog is still not responding, contact the Customer Care Center at 1-300-843-364

The Bark Control Collar Indicator Light is flashing.

• Replace battery

 


TO DISCHARGE THE BARK CONTROL COLLAR

Important: Avoid touching the Contact Points and Sensor Probe unless the Bark Control Collar is completely discharged.

After battery removal, the Bark Control Collar retains some stored energy and may still activate around 2 or 3 times. To fully discharge the Bark Control Collar, slide the Sensor Probe across a table or hard surface several times until the Bark Control Collar stops beeping.

The battery normally stays charged for several months of use. Recharging varies on the frequency of use and of dog’s barking behavior.

TURNING THE BARK COLLAR ‘ON’

To turn “ON” the Bark Collar, rotate the dial clockwise from ‘0’ (off) to your desired setting. This can be done using your fingers or with a coin.
Each time the unit is turned ‘on’ and each time the setting is changed, the Bark Collar vibrates briefly and the status light will illuminate. This is an auto ‘self-test’ to confirm the Bark Collar is working.

FITTING THE BARK COLLAR

Make sure that the setting is in the off (‘0’) position when fitting the bark collar.

For the product to be effective, the collar should be properly fitted.

  • The collar strap should be directly behind your dog’s ears. 
  • The collar should have a snug fit. The contact posts should be able to detect the dog’s bark and should be able to send the vibration. Contact posts must always touch the dog’s skin. 

The Bark Collar should be positioned at the center just below the dog’s chin. If the collar is too loose, or if the collar is placed away from the center of the neck, the bark may not be detected and the dog may not feel the vibration or stimulation at all.
 


IMPORTANT 

  • There is a brief moment ‘bark forgiveness’ which delays the collar activation, so you can expect that the response of the dog will not be immediate. 
  • The vibration or stimulation gradually increases (for each setting) as the dog continues to bark
  • The response should only be subtle and not very obvious. 

Product Review


Model

PBC19-10765

Correction Modes

Static
Activation Mode Vibration
Correction Levels 6
Waterproof Yes
Dog Size 3.6kg and up
Strap Size 15cm - 71cm
Battery RFA-67
Bark Collar Weight 1.9 oz
Dimensions 2.23" (L) x 2.24" (W) x 1.27" (D)"


6 STIMULATION LEVELS - AUTOMATICALLY INCREASING

The PetSafe PBC-102 Bark Control Collar features 6 total stimulation levels that will automatically increase as your dog barks.
 

AUTOMATIC LEVEL RESET - RESETS BACK TO THE LOWEST LEVEL

To ensure the best results, once your dog stops barking for 30 seconds, the PetSafe Bark Control Collar PBC-102 will automatically reset back to its lowest level.
 

DURABLE AND WATERPROOF DESIGN

Hard knocks and water damage is a thing of the past. The PetSafe Basic Bark Control Collar is completely waterproof to keep your water-loving dog safe.
 

SPECIAL RUBBER COATING TO REDUCE FALSE

A special rubber coating protects the Bark Control Collar from false activation and also helps protect the collar from knocks against other objects.
 

VIBRATION SENSOR - MONITORS YOUR DOG'S VOCAL CORDS

Only your dog’s bark will activate the collar. A vibration sensor monitor’s for vibrations that are produced when your dog barks and delivers stimulation.
 

Compact & Lightweight Bark Collar COMPACT & LIGHTWEIGHT BARK COLLAR

The PetSafe Bark Control Collar PBC-102 is small, compact and lightweight for your dog’s comfort.
 

REPLACEABLE BATTERY - PETSAFE RFA-67 6V LITHIUM BATTERY

This uses the PetSafe RFA-67 6V Lithium Battery. It can last up to 6 months of use under normal conditions and also helps with waterproofing the bark control collar.


PetSafe & Anti Bark Control Collar Manual

 

KEY DEFINITIONS

Contact Points: Delivers the safe Static Correction.
Sensor Probe: Detects the vibrations of your dog’s barking. Note: The Sensor Probe is not adjustable.
Low Battery Indicator: The Indicator light flashes to indicate the battery is low.
 

FIT THE BARK CONTROL COLLAR

Important: The proper fit and placement of your Bark Control Collar are essential for successful training. The Contact Points must always have direct contact with your dog’s skin on the neck.

To assure a proper fit, please follow these steps:
1. Make sure that no battery is installed in the Bark Control Collar. 
2. Let your dog stand comfortably. 
3. Place the Bark Control Collar high on your dog’s neck close to the ears. Center the Contact Points underneath your dog’s neck, making sure it touches the skin.

Note: It may be necessary to trim the hair around the Contact Points to ensure contact.

4. The distance between the Contact Points and your dog’s neck should at least be 1finger. The fit should be snug but not c. 
5. Allow your dog to wear the Bark Control Collar for several minutes and then recheck the fit. Adjust the collar to your dog’s comfortable fit. Again allow the dog to be comfortable and check the fit again. 
6. Trim the collar as follows: 
a. Mark the desired length of the Bark Control Collar with a pen. Give a little allowance especially if your dog is young or if it grows a thick winter coat. 
b. Remove the Bark Control Collar from your dog and cut off the excess strap. 
c. Before putting the Bark Control Collar back onto your dog, seal the frayed edges of the cut collar running it over a candle flame. 

Important: To ensure product comfort, safety, and effectiveness; the following should be observed:

  • Always check the fit by being maintaining the one-finger distance between the Contact Point and your pet’s skin. We do not want it to be too tight or too loose.
  • Your dog’s neck should be checked daily for any sign of a rash or sore. 
  • If a rash or sore is observed, discontinue the use of the Bark Control Collar for a few days. 
  • If the condition does not improve in spite of discontinued use of the collar; or if the condition is still observed and is already beyond 48 hours, see your veterinarian. 
  • Your pet’s neck and the Contact Points must be washed at least once a week with a washcloth and mild hand soap. Make sure to rinse thoroughly after each washing. 

A condition called Pressure Necrosis, which is characterized by a strain or sore caused by compression and prolonged contact may occur if the measures above are not religiously observed.
 

TO INSERT AND REMOVE THE BATTERY

Note: NEVER install the battery while the Bark Control Collar is on your dog.

This Bark Control Collar uses a replaceable PetSafe® battery (RFA-67). This unique battery is designed to make battery replacement easier. It also increases water protection.

To insert the battery, align the symbols on the battery (arrow) and Bark Control Collar (triangle). Use a large coin to turn the battery clockwise until the arrow is aligned with the lock symbol on the housing.

To remove the battery, simply turn the battery counter-clockwise using a large coin. NEVER attempt to cut into or pry open the battery. Be sure to dispose of used batteries properly.
 

BATTERY LIFE

The average battery life is 3 to 6 months. It will depend solely on how often your dog barks. It may be observed that the battery you use during training may run out faster compared to replacement batteries. This is because dogs tend to bark more during the initial stage of training and will normally minimize barking later on.
 

LOW BATTERY INDICATOR

The Low Battery Indicator light will be on to notify you that it is time to change the battery.
 

WHAT TO EXPECT DURING USE OF THE BARK COLLAR

Important: Do not leave your dog alone in the first few days of Training.

Place the Bark Control Collar properly on your dog and stay close by. Most dogs will understand quickly that the Bark Control Collar is doing something to them when they bark; so in response; dogs normally relax and stop barking. And because Static Correction from the Bark Control Collar may be surprising or startling at first, some dogs may bark more at the initial correction. There is always an adjustment stage.

A rare scenario may also occur where a dog may go into a bark-correction-bark-correction cycle especially in the initial phase. If this happens, make sure to help your dog calm down. As your dog relaxes, he will understand that if he becomes quiet, he will not receive Static Corrections. Again; this is very rare.

Usually; a reduction in your dog’s barking is noticed within the first couple of days of use. At this point, it is important to remember the learning process should be complete. Dogs may “test” this new learning experience and will increase their attempts to bark. This usually occurs during the second week. If this does occur, remain consistent and do not discontinue the use of the collar. Your dog must get used to using the collar all the time. Removing the collar every now and then may affect training success.
 

REGULAR MAINTENANCE

• Contact Points tightness should be checked weekly
Note: Do not adjust the factory preset Sensor Probe.

• Clean Contact Points with alcohol weekly
Note: Remove the battery and discharge the Bark Control Collar before touching the Contact Points.

• Check your dog’s neck for irritation and wash the neck weekly.


TESTING THE BARK CONTROL COLLAR

Slide the Sensor Probe across a rough surface that is at least 10 inches. The Bark Control Collar should beep. If your Bark Control Collar doesn’t beep during this test, see “The Bark Control Collar does not beep” in the “Troubleshooting” section, and continue with step 2.
 

ACCESSORIES

Component

Part Number

Battery - two-pack

RFA-67D-11

Replacement Collar

RFA-68

Accessory Pack (Extra Contact Points, washers, and battery)

RFA-118

Bark Control Video - VHS

RFA-149

 

FREQUENTLY ASKED QUESTIONS


Is my dog gonna stop barking completely?
 

• The Bark Control Collar, when worn properly, stops all forms of barking. It should only be worn during periods of unwanted barking; for example at night or during parties.

My dog is sensitive. Can I lower the Static Correction level?

• You can get a resistor to reduce the Static Correction level.

Will other dog’s barking activate the Bark Control Collar?

No.

Is the Bark Control Collar safe for my dog?

 

• Yes. The Bark Control Collar is designed to get your dog’s attention. It is not intended to punish. The initial Static Correction may startle your dog though.

Will the Bark Control Collar be effective for my dog?

• The Bark Control Collar is safe and effective for all breeds and sizes of dogs over 8 pounds.

 


TROUBLESHOOTING





The Bark Control Collar is not beeping.



 

• Test the Bark Control Collar (see “Testing the Bark Control Collar”).
• If your Bark Control Collar still does not beep during this test, do the same test but now on a rougher surface.
• Check to see if the battery is properly installed.
• Replace the battery.
• If the Bark Control Collar is still not beeping, contact Customer Care Center at 1-300-843-364


My Bark Control Collar beeps, but my dog is still barking (dog is not responding to the Static Correction).
 

• Tighten the Bark Control Collar and trim your dog’s hair where the Contact Points touch his neck.
• Replace the battery.
• If your dog is still not responding, contact the Customer Care Center at 1-300-843-364

The Bark Control Collar Indicator Light is flashing.

• Replace battery

 


TO DISCHARGE THE BARK CONTROL COLLAR

Important: Avoid touching the Contact Points and Sensor Probe unless the Bark Control Collar is completely discharged.

After battery removal, the Bark Control Collar retains some stored energy and may still activate around 2 or 3 times. To fully discharge the Bark Control Collar, slide the Sensor Probe across a table or hard surface several times until the Bark Control Collar stops beeping.

The battery normally stays charged for several months of use. Recharging varies on the frequency of use and of dog’s barking behavior.

TURNING THE BARK COLLAR ‘ON’

To turn “ON” the Bark Collar, rotate the dial clockwise from ‘0’ (off) to your desired setting. This can be done using your fingers or with a coin.
Each time the unit is turned ‘on’ and each time the setting is changed, the Bark Collar vibrates briefly and the status light will illuminate. This is an auto ‘self-test’ to confirm the Bark Collar is working.

FITTING THE BARK COLLAR

Make sure that the setting is in the off (‘0’) position when fitting the bark collar.

For the product to be effective, the collar should be properly fitted.

  • The collar strap should be directly behind your dog’s ears. 
  • The collar should have a snug fit. The contact posts should be able to detect the dog’s bark and should be able to send the vibration. Contact posts must always touch the dog’s skin. 

The Bark Collar should be positioned at the center just below the dog’s chin. If the collar is too loose, or if the collar is placed away from the center of the neck, the bark may not be detected and the dog may not feel the vibration or stimulation at all.
 


IMPORTANT 

  • There is a brief moment ‘bark forgiveness’ which delays the collar activation, so you can expect that the response of the dog will not be immediate. 
  • The vibration or stimulation gradually increases (for each setting) as the dog continues to bark
  • The response should only be subtle and not very obvious. 

RFA-67 Battery | Petsafe RFA67 Bark Collar Battery

AU $16.2

RRP AU $17.99